If you buy overhead line materials, you know a small spec mismatch can mean delayed shipments, rework on site, or a cable that doesn’t suit the span. Duplex cable is a good example. The name is common in the trade, but suppliers describe it in different ways, and a quotation only helps if both sides mean the same product.
This guide explains what duplex cable is, how to read its specifications, and how to choose a size. It also lists what to confirm before you place an order. The size data comes from the 2-core range of HNBF Power’s IEC aerial bundled cable.
What Is a Duplex Cable?

In overhead power distribution, a duplex cable is generally a 2-core aerial bundled cable (ABC). Two insulated aluminum conductors are twisted together into one compact unit and strung between poles or fixed to buildings. It is often used as a service drop, bringing power from the distribution line to a customer’s connection point.
Terminology varies by region. Some buyers say “duplex” for two insulated cores, while others use a similar name for a phase conductor plus a bare neutral messenger. So always specify the core count, conductor size, neutral type and standard in your inquiry, not just the word “duplex”.
The advantages of bundled cable over bare open-wire lines are well established. It is compact and lighter to handle. Insulated cores are more tolerant of tree contact and tight spacing, and the bundle keeps phase conductors together in one assembly.
Where Duplex Cable Is Used
According to HNBF Power’s product data, aerial bundled cable is used mainly for overhead service applications, including:
- Construction site power supply
- Outdoor and street lighting
- Low-voltage distribution line networks
- Alternating power networks at nominal 0.6/1kV, or direct power networks up to a maximum of 0.9kV depending on the country
For distributors and contractors, a 2-core cable suits single-phase service connections where a full three- or four-core bundle isn’t needed.
Duplex Cable Specifications at a Glance
Conductor and insulation
HNBF Power’s IEC aerial bundled cable uses circular stranded, compacted aluminum conductors. Aluminum alloy or ACSR conductors are also available for projects that need different mechanical strength. Insulation is black polyethylene (PE) or cross-linked polyethylene (XLPE). Cores can be identified by color stripe, rib or number, which helps installers match phases on site.
Electrical and thermal performance
| Parameter | Value (per product data) |
|---|---|
| Rated voltage | 0.6/1kV |
| Standard | IEC |
| Max. service temperature | 90°C |
| Max. short-circuit temperature | 250°C (max. 5 seconds) |
| Min. service temperature | −20°C |
| Chemical, UV and oil resistance | Good |
Installation and handling
The minimum bending radius is 15 times the cable diameter. The cable is listed for open-air and buried installation. Check suitability for your project conditions before specifying it. Marking options include oil-ink, laser and embossing printing. Packaging is by roll or by polywood, wooden or steel-wooden reel, depending on length and shipping needs.
Duplex Cable Size Chart (2×10 to 2×240 mm²)
The table below shows the 2-core range from the manufacturer’s IEC product data. All values are nominal or approximate.
| Size (mm²) | No. of wires | Bare conductor O.D. (mm) | Insulation thickness (mm) | Approx. overall diameter (mm) | Approx. weight (kg/km) |
|---|---|---|---|---|---|
| 2×10 | 7 | 4.05 | 1.0 | 12.1 | 84.42 |
| 2×16 | 7 | 4.8 | 1.2 | 14.4 | 132.69 |
| 2×25 | 7 | 6.0 | 1.2 | 16.8 | 190.36 |
| 2×35 | 7 | 7.0 | 1.4 | 19.6 | 263.58 |
| 2×50 | 7 | 8.3 | 1.4 | 22.2 | 352.80 |
| 2×70 | 19 | 10.0 | 1.4 | 25.6 | 478.29 |
| 2×95 | 19 | 11.6 | 1.6 | 29.6 | 647.49 |
| 2×120 | 37 | 13.0 | 1.6 | 32.4 | 797.32 |
| 2×150 | 37 | 14.6 | 1.8 | 36.4 | 995.71 |
| 2×185 | 37 | 16.2 | 2.0 | 40.4 | 1229.46 |
| 2×240 | 37 | 18.4 | 2.2 | 45.6 | 1593.87 |
Weight per kilometer matters more than many buyers expect. It affects pole loading, stringing equipment, freight cost and how much cable fits on a reel.
How to Choose the Right Duplex Cable Size

Start with the load. Size the conductor from the expected current, allowable voltage drop and run length. Because ampacity depends on installation conditions, ask your supplier for current-carrying data and confirm it against your own engineering calculations rather than choosing by cross-section alone.
Consider the span and support. A larger cross-section adds weight and diameter, as the table shows. Moving from 2×35 to 2×95 more than doubles the weight per kilometer. Check that your poles, hardware and clamps are suitable.
Think about handling. With a bending radius of 15 times the cable diameter, a 2×70 cable (25.6 mm overall) needs a bend radius of about 384 mm. That is useful for planning routes, terminations and drum handling.
Match the conductor to the mechanical need. Standard aluminum is common for service drops. If your project demands higher strength, ask about aluminum alloy or ACSR options.
Duplex vs Three-Core and Four-Core ABC
The same IEC product line also comes in 1-, 3- and 4-core versions, plus configurations with a bare messenger (1+1, 2+1, 3+1). A 2-core duplex cable usually fits single-phase supply. For three-phase service or distribution lines with a dedicated neutral, three- or four-core and messenger-type bundles are the more common choice. If you are unsure, send the supply type and voltage with your inquiry, and the sales team can suggest the right configuration.
Procurement Checklist Before You Order
Before you request a quote, confirm these details so the offer matches your project:
- Core configuration: 2 insulated cores, or 1+1 with a bare messenger
- Conductor size and material: aluminum, aluminum alloy or ACSR
- Insulation type: PE or XLPE
- Standard: IEC, or an NFC or ASTM version if your market requires it
- Rated voltage: 0.6/1kV
- Core identification: color stripe, rib or number
- Marking: printing method and any customer text
- Quantity, reel length and packaging: roll, polywood, wooden or steel-wooden reel
- Test reports and documentation: request what your project or tender requires
- Destination and delivery schedule: for freight and lead-time planning
Why Source Duplex Cable from HNBF Power
HNBF Power is the brand of Henan Baofeng Cable Co., Ltd., a manufacturer that has been producing cable and wire since 2001. The company handles R&D, production and sales under one roof from its base in Gongyi City, Zhengzhou, Henan, China. For procurement teams, that offers several practical benefits:
- Direct manufacturer contact with no layers of intermediaries between you and the factory
- Standards flexibility, with ABC cable available to IEC, NFC and ASTM standards
- Broader overhead line range, including bare conductors such as AAAC and ACSR, so related materials can be quoted together
- Custom options for core identification, cable marking and packaging
- Responsive communication, as inquiries sent through the website are answered within 24 hours
If you are comparing suppliers, send your specification and ask for the standard, the test documentation available and the packaging details in writing. A reliable manufacturer should answer those clearly.
Ready to check your specification? Request a duplex cable quote or view the IEC aerial bundled cable specs.
FAQ
Q1. What is a duplex cable in overhead power lines?
It is generally a 2-core aerial bundled cable: two insulated conductors twisted together for overhead service or distribution use. Because naming differs by market, confirm the core count and neutral type with your supplier.
Q2. What sizes of duplex cable are available?
HNBF Power’s IEC 2-core range runs from 2×10 mm² to 2×240 mm². See the size chart above for diameters and weights.
Q3. Is duplex cable rated for 0.6/1kV?
The IEC aerial bundled cable is listed at 0.6/1kV for alternating power networks, and for direct power networks up to a maximum of 0.9kV depending on the country.
Q4. What conductor and insulation materials are used?
Conductors are compacted stranded aluminum, with aluminum alloy or ACSR options. Insulation is black PE or XLPE.
Q5. What is the maximum operating temperature?
Per the product data, maximum service temperature is 90°C, short-circuit temperature is 250°C for up to 5 seconds, and minimum service temperature is −20°C.
Q6. Can I order other standards such as NFC or ASTM?
Yes. HNBF Power also lists aerial bundled cable to NFC and ASTM standards. Tell the sales team which standard your project requires.
Conclusion
Duplex cable is simple in concept, but ordering it well takes attention to detail: core count, conductor material, insulation, standard, size and packaging. Use the size chart above to shortlist options, run your own load and voltage-drop checks, and put the full specification in your inquiry.
If you want a manufacturer’s view on your requirements, send your cable inquiry to HNBF Power. Include your size, quantity and standard, and the team will reply within 24 hours.